FINAL SERIES | LYNN | 13657655
 Photo taken at: 0 SECOND  >  20 SECOND  >  40 SECOND  >  6O SECOND  >  80 SECOND ( Left to right)
Photos taken at: 100 SECOND  >  120 SECOND  >  140 SECOND  >  160 SECOND  >  180 SECOND (Left to right)
Materials

-220 ml pasteurized cow milk.
-Minimum of 5ml Sunlight liquid disk soap.
-0.7ml Thien Long purple pen ink cartridges (x2).
-0.5ml Schneider blue pen ink cartridges (x2).
-Cotton swabs (x3).

Pen ink cartridges were chosen as the ink is waterier and more stable than mixture of watercolors and water. Also, using purple and blue ink resulted in the changes and movements obviously. Pasteurized cow milk was also chosen over water as it has white base which causes the prominence of ink. Liquid disk soap had interactions (dispersion) with milk and ink at different intervals.
​​​​​​​


Substrate 

-250mm diameter white glazed porcelain plate with 25mm upturn to the edge perimeter.​​​​​​​

Use white glazed porcelain plate because it can serves as white background and it does not modify the properties of milk. It also could be reused after every use.

Technique 
Pour 220ml pasteurized cow milk into white glazed porcelain plate. Drop purple and blue ink into the milk randomly. 
Dip cotton swabs with liquid disk soap into the milk.
Allow the liquid disk soap on cotton swabs interacts with milk and ink. 
The dispersion of milk and ink would depend on how much liquid disk soap used and the direction it goes.
​​​​​​​
Apparatus
-1m small rope.
-Makeup brushes airer with racks 300x300x500

Cotton swabs with liquid disk soap should be held just on the surface of milk by tying on Makeup brushes airer. 
Natural wind would direct those cotton swabs and create the variety of characteristics.
Bigger ties would make cotton swabs heavier so that they could stay in the liquid and do not go out of control because of unexpected movement from wind.

System drawing



Method drawing
Step 1: Pour 220ml pasteurized cow milk in white glazed porcelain plate
Step 2: Drop purple and blue ink into milk randomly
Step 3: Drop liquid disk soap onto cotton swabs
Step 4: Tie cotton swabs with rope and hang the rope on the makeup brushes airer.
Step 5: Allow those cotton swabs move around by nature wind 
Change drawing
Final Series
Published:

Final Series

Published: